Produkt dnia
Mega2560 R3 ATmega 2560  CH340
Mega2560 R3 ATmega 2560 CH340
39,90 zł
szt.

Open407Z Package B

Dostępność: dostępny na zamówienie. Prosimy o kontak z biurem sklep@propix.com.pl
Cena: 539,00 zł 539.00
ilość szt.
dodaj do przechowalni
Producent: WaveShare
Kod produktu: 1252-559B9

Opis

Open207_baner

Open407Z is an STM32 development board that features an STM32F407ZGT6 device as the microcontroller. It supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32F4 Hi-Performance microcontroller.


What's On Board


open207

 

 

  1. STM32F407ZGT6: the STM32F2 Hi-Performance microcontroller which features:
    • Core: ARM Cortex-M4 32-bit RISC
    • Feature: a full set of single-cycle DSP instructions
    • Operating frequency: 120MHz, 150 DMIPS/1.25 DMIPS/MHz
    • Operating voltage: 1.8V-3.6V
    • Package: LQFP144
    • Memories: 1024KB Flash, 128+4kB SRAM
    • MCU communication interfaces:
      • 3 x SPI, 3 x USART, 2 x UART, 2 x I2S, 3 x I2C
      • 1 x FSMC, 1 x SDIO, 2 x CAN
      • 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY
      • 1 x 10/100 Ethernet MAC
      • 1 x 8 to 14-bit parallel camera interface
    • AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
    • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
  2. AMS1117-3.3: 3.3V voltage regulator
  3. MIC2075-2BM: onboard chip for USB power management
  4. 74LVC139: used for FSMC expansion, make it possible to connect multi devices through FSMC at the same time, such as LCD and NAND FLASH
  5. Power supply switch: 5V DC or USB
  6. Boot mode switch: for configuring BOOT0 pin
  7. Power indicator
  8. VBUS indicator
  9. LEDs: convenient for indicating I/O status and/or program running state
  10. Reset button
  11. User key: convenient for I/O input and/or interact with running code
  12. Wake-Up button: wake up the STM32 MCU from sleep mode, also used as regular user key.
  13. Joystick: five positions
  14. 32.768K crystal oscillator: for internal RTC with calibration
  15. 25M crystal oscillator: enables the MCU run at 120M frequency by frequency multiplication
  16. Crystal empty slot (without soldered crystal oscillator): for soldering 50M active crystal oscillator, which'll provide clock to DCMI
  17. USB: communicating with PC, and/or used as USB Host (requires an OTG cable)
  18. Ethernet interface: easily connects the MCU to ethernet network by using an additional ethernet module
  19. FSMC interface (16-bit FSMC): for connecting peripherals such as NorFlash, SRAM, etc.
  20. USART1 interface: easily connects to RS232, RS485, USB TO 232, etc.
  21. PS/2 interface: easily connects to PS/2 keyboard and/or mouse
  22. FSMC + SPI interface (16-bit FSMC + SPI): for connecting touch screen LCD
  23. FSMC interface (8-bit FSMC): easily connects to peripherals such as NandFlash, Ethernet, etc.
  24. CAN2 interface: communicates with accessory boards which feature the CAN device conveniently
  25. USART2 interface: easily connects to RS232, RS485, USB TO 232, etc.
  26. USART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
  27. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
  28. ULPI interface: for connecting high-speed USB peripheral (the STM32F207Z integrates USB HS controller without any PHY device)
  29. I2C1/I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), EEPROM (AT24Cxx), etc.
  30. SPI1/SPI2 interface
    • easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
    • SPI1 features AD/DA alternative function, supports connecting AD/DA module as well
  31. I2S2 / I2S3 / I2C1: for connecting I2S peripherals, such as Audio module
  32. DCMI interface: for connecting camera module
  33. CAN1 interface: communicates with accessory boards which feature the CAN device conveniently
  34. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
  35. 5V DC jack
  36. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board
  37. MCU pins connector: all the MCU pins are accessible on expansion connectors for further expansion
  38. JTAG/SWD interface: for debugging/programming
  39. USB jumper
    • short the jumper to enable certain USB function
    • open the jumper to disable
  40. 74LVC139 selection jumper (used for FSMC chip selection)
    • short the jumper to connect to default I/Os used in example code
    • open the jumper to connect to custom I/Os via jumper wires
  41. PS/2 interface jumper
    • short the jumper to connect the PS/2 device to default I/Os used in example code
    • open the jumper to connect the PS/2 device to custom I/Os via jumper wires
  42. LEDs jumper
    • short the jumper to connect the LEDs to default I/Os used in example code
    • open the jumper to connect the LEDs to custom I/Os via jumper wires
  43. User key/Joystick jumper
    • short the jumper to connect to default I/Os used in example code
    • open the jumper to connect to custom I/Os via jumper wires
  44. VBAT selection jumper
    • short the jumper to use system power supply
    • open the jumper to make it possible to connect the VBAT to external power, such as battery
  45. VREF selection jumper
    • short the jumper to connect VREF+ to VCC
    • open the jumper to customize VREF+


 

Do pobrania


download  
SCHEMAT MODUŁU
 
 

 

 

Zawartość zestawu

W skład zestawu wchodzą akcesoria z "Standard Package" oraz "Accessory Boards Package" .

 

Standard Package

Accessory Boards Package

   
  1. Open407Z development board x 1
  2. PL2303 USB UART Board (mini) x 1
  3. USB type A plug to mini-B plug cable x 1
  4. USB type A receptacle to mini-B plug cable x 1
  5. 4-pin wire x 2
  6. 2-pin wire x 2
  7. 5V Power Adapter x 1
  8. User Guide CD x 1

  1. 3.2inch 320x240 Touch LCD (A) (FSMC + SPI) x 1
  2. USB3300 USB HS Board (ULPI) x 1
  3. DP83848 Ethernet Board (ETH) x 1
  4. K9F1G08U0C NandFlash Board (FSMC) x 1
  5. S29GL128P NorFlash Board (FSMC) x 1
  6. IS62WV12816BLL SRAM Board (FSMC) x 1
  7. OV7670 Camera Board (DCMI) x 1
  8. Micro SD Storage Board (SDIO/SPI) x 1
  9. AT45DBXX DataFlash Board (SPI+IOs) x 1
  10. FM24CLXX FRAM Board (I2C) x 1
  11. UDA1380 Board (I2S+I2C) x 1
  12. VS1003B MP3 Board (SPI+IOs) x 1
  13. Analog Test Board (for AD/DA testing) x 1
  14. SN65HVD230 CAN Board (CAN) 2pcs x 1
  15. NRF24L01 RF Board (B) (SPI+IOs) 2pcs x 1
  16. Ethernet Cable x 1




 1  2  3
 4
 7   1 2 3
                4 5 6
7 8 9
10 11 12
13 14 15
16    

 

do góry
Sklep jest w trybie podglądu
Pokaż pełną wersję strony
Sklep internetowy od home.pl