HAT L76X Multi-GNSS Module, GPS, BDS, QZSS
Opis
Moduł GNSS w postaci nakładki HAT dla układów Raspberry Pi, układ obsługuje systemy Multi-GNSS: GPS, BDS i QZSS, Zaletami modułu są: szybkie pozycjonowanie, wysoka dokładność, niskie zużycie energii itp.
- Supports Multi-GNSS systems: GPS, BDS, and QZSS
- EASY™, self track prediction technology, help quick positioning
- AlwaysLocate™, intelligent controller of periodic mode for power saving
- Supports DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
- UART communication baudrate: 4800~115200bps (9600bps by default)
- Onboard battery holder, supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
- 4x LEDs for indicating the module working status
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
- Interfejs komunikacyjny: UART
- Szybkość transmisji: 4800 ~ 115200bps (domyślnie 9600bps)
- Częstotliwość aktualizacji: 1 Hz (domyślnie), 10 Hz (maksimum)
- Protokoły: NMEA 0183, PMTK
- Napięcie zasilania: 5V / 3,3V
- Prąd roboczy: 13mA
- Temperatura pracy: -40℃ ~ 85℃
- Wymiary: 65 mm x 30 mm
- L76B module
- CP2102: USB TO UART converter
- CAT24C32: EEPROM
- RT9193-33: power manager
- Backup mode wakeup button
- Standby switch
- Indicators:
- RXD/TXD: UART RX/TX indicator
- PPS: GPS status indicator
- PWR: power indicator
- Raspberry Pi GPIO connector: for connecting with Raspberry Pi
- USB TO UART port
- GNSS antenna connector
- Battery holder: supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
- UART selection jumpers
- A: control the L76B through USB TO UART
- B: control the L76B through Raspberry Pi
- C: access Raspberry Pi through USB TO UART
Dodatkowe informacje:
Wiki : www.waveshare.com/wiki/L76X_GPS_HAT
W zestawie:
- L76X GPS HAT x1
- GPS External Antenna (B) x1
- USB type A plug to micro plug cable x1
- RPi screws pack (2pcs) x1
- 2x20PIN pinheader x1