Open32F3-D Package B STM32F3 DISCOVERY

Dostępność: spodziewana dostawa
Cena: 397,00 zł 397.00
ilość szt.

towar niedostępny

dodaj do przechowalni
Producent: WaveShare
Kod produktu: 336A-18807

Opis

Open32F3-D zestaw uruchomieniowy oparty na modułe Discovery STM32F3 z mikrokontrolerem STM32F303VCT6 (72 MHz, 256 KB Flash, 48 kB RAM, rdzeń Cortex-M4 ARM). Moduła i otwarta konstrukcja czyni go idealnym układem do rozpoczęcia tworzenia aplikacji dla mikrokontrolerów z serii STM32. W skład zestawy wchodzą, moduły peryferyjne firmy waveshare np. moduły dźwieku, dodatkową pamięć, transceiver CAN, RS232, LCD itp. rozbudowę ułatwi płyta bazowa z dedykowanymi złączami.

  1. STM32F3DISCOVERY socket: for easily connecting the STM32F3DISCOVERY
  2. ZigBee interface: for connecting ZigBee modules such as CC2530 module.
  3. USART2 interface: easily connects to RS232, RS485, USB TO 232, etc.
  4. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
  5. 8I/Os interface: for connecting accessory boards such buttons, motors, etc.
  6. SPI1 / SPI2 + DAC + ADC interfaces:
    • easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
    • easily connects to AD/DA modules
  7. Humidity sensor socket: for connecting humidity sensor such as HS1101LF, etc.
  8. I2S / I2C1 interface: easily connects to I2S peripherals such as audio module, etc.
  9. LCD connector: for connecting touch screen LCD
  10. CAN interface: communicates with accessory boards which feature the CAN device conveniently
  11. PS/2 interface: easily connects to PS/2 keyboard and/or mouse
  12. I2C1 / I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), FRAM (FM24CLxx), etc.
  13. Resistive sensor socket: for connecting resistive sensor such as photoresistor, etc.
  14. USART1 interface: easily connects to RS232, RS485, USB TO 232, etc.
  15. 5V DC jack
  16. 5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
  17. MCU pins connector: all the MCU I/O ports are accessible on expansion connectors for further expansion
  18. STM32-JTAG/SWD interface: for STM32 debugging/programming
  19. ZigBee-JTAG interface: for ZigBee debugging/programming
  20. Power switch
  21. Boot mode switch: for configuring BOOT0 pin
  22. Joystick jumper
    • short the jumper to connect the joystick to default I/Os used in example code
    • open the jumper to connect the joystick to custom I/Os via jumper wires
  23. PS/2 interface jumper
    • short the jumper to connect the PS/2 devices to default I/Os used in example code
    • open the jumper to connect the PS/2 devices to custom I/Os via jumper wires
  24. LDR jumper
    • short the jumper to use resistive sensor, certain I/Os are required
    • open the jumper to disconnect from the I/Os
  25. Humidity jumper
    • connect the left two pins to retrieve data from capacitive sensor
    • connect the right two pins to retrieve data from 180p capacitor (for testing)
  26. Power indicator
  27. Joystick: five positions
  28. ZigBee reset

 

STM32F3DISCOVERY

  • STM32F303VCT6 microcontroller featuring 256 KB Flash, 48 KB RAM in an LQFP100 package
  • On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
  • Board power supply: through USB bus or from an external 3 V or 5 V supply voltage
  • External application power supply: 3 V and 5 V
  • L3GD20, ST MEMs motion sensor, 3-axis digital output gyroscope
  • LSM303DLHC, ST MEMs system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor
  • Ten LEDs:
    • LD1 (red) for 3.3 V power on
    • LD2 (red/green) for USB communication
    • Eight user LEDS, LD3/10 (red), LD4/9 (blue), LD5/8 (orange) and LD6/7 (green)
  • Two pushbuttons (user and reset)
  • USB USER with Mini-B connector
  • Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing

 

W zestawie:

  1. Open32F3-D mother board
  2. 4-pin wire x 2
  3. 2-pin wire x 2
  4. USB power cable
  5. STM32F3DISCOVERY
  6. 3.2inch 320x240 Touch LCD
  7. UDA1380 Board
  8. FM24CLXX FRAM Board
  9. Micro SD Storage Board
  10. SN65HVD230 CAN Board
  11. Analog Test Board
  12. PL2303 USB UART Board (mini)
  13. VS1003B MP3 Board
  14. AT45DBXX DataFlash Board
  15. DS18B20
  16. HS1101LF
  17. USB type A plug to mini-B plug cable

 

1   2   3 4  5  6 
 8 10  11   12
 13  14  15  16 17   

 

Dodatkowe informacje:

Wiki: www.waveshare.com/wiki/Open32F3-D

Produkty powiązane

do góry
Sklep jest w trybie podglądu
Pokaż pełną wersję strony
Sklep internetowy od home.pl