Open429Z-D Package S 32F429IDISCOVERY

Dostępność: dostępny
Wysyłka w: 24 godziny
Cena: 149,00 zł 149.00
ilość szt.

towar niedostępny

dodaj do przechowalni
Producent: WaveShare
Kod produktu: 075F-8639D

Opis

Moduł płyty bazowej dla układu Discovery STM32F429I-DISC1 z mikrokontrolerem STM32F429ZIT6 (180 MHz, 2 MB Flash, 256 kB RAM, rdzeń Cortex-M4F ARM). Moduła i otwarta konstrukcja czyni go idealnym układem do rozpoczęcia tworzenia aplikacji dla mikrokontrolerów z serii STM32.

  1. 32F429IDISCOVERY socket: for easily connecting the 32F429IDISCOVERY
  2. MCU pins connector: all the MCU I/O ports are accessible on expansion connectors for further expansion
  3. USB connector: USB to UART via the onboard convertor PL2303
  4. I2C1/I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), FRAM (FM24CLxx), etc.
  5. I2S2/I2S3/I2C1 interface: easily connects to I2S peripherals such as audio module, etc.
  6. DCMI interface: for connecting camera
  7. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
  8. CAN1 interface: communicates with accessory boards which feature the CAN device conveniently
  9. CAN2 interface: communicates with accessory boards which feature the CAN device conveniently
  10. UART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
  11. SPI1/SPI4 + AD/DA interfaces:
    • easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
    • easily connects to AD/DA modules (SPI1 features AD/DA alternative function)
  12. UART2 interface: easily connects to RS232, RS485, USB TO 232, etc.
  13. 8-bit FMC interface: easily connects to peripherals such as NandFlash
  14. SAI1 interface: for connecting audio modules like UDA1380 module
  15. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
  16. 5V DC jack
  17. 5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
  18. TAG/SWD interface: for debugging/programming
  19. Joystick jumper
    • short the jumper to connect the joystick to default I/Os used in example code
    • open the jumper to connect the joystick to custom I/Os via jumper wires
  20. Boot mode switch: for configuring BOOT0 pin
  21. USB to UART jumper
  22. AMS1117-3.3: 3.3V voltage regulator
  23. PL2303: USB to UART convertor
  24. 12MHz crystal
  25. 5V DC power switch
  26. Power indicator
  27. UART1 indicator
  28. Joystick: five positions

STM32F429I-DISC1 ulepszona wersja bardzo popularnego zestawu STM32F429I-DISCO, jedną ze zmian jaka wprowadzono, to możliwość pracy z środowiskiem programistycznym mbed.

  • STM32F429ZIT6 microcontroller featuring 2 Mbytes of Flash memory, 256 Kbytes of RAM in an LQFP144 package
  • On-board ST-LINK/V2-B
  • mbed™ -enabled (mbed.org)
  • USB functions:
    • debug port
    • virtual COM port
    • mass storage
  • Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage
  • 2.4" QVGA TFT LCD
  • 64-Mbit SDRAM
  • L3GD20, ST MEMS motion sensor 3-axis digital output gyroscope
  • Six LEDs:
    • LD1 (red/green) for USB communication
    • LD2 (red) for 3.3 V power-on
    • Two user LEDs: LD3 (green), LD4 (red)
    • Two USB OTG LEDs: LD5 (green) VBUS and LD6 (red) OC (over-current)
  • Two push-buttons (user and reset)
  • USB OTG with micro-AB connector
  • Extension header for LQFP144 I/Os for a quick connection to the prototyping board and an easy probing
  • Comprehensive free software including a variety of examples, part of STM32CubeF4 package or STSW-STM32138 for legacy standard libraries usage

 

W zestawie:

  1. Open429Z-D mother board
  2. 4-pin 2-pin wires pack
  3. USB power cable

 

1   2   3

Dodatkowe informacje:

Wiki: www.waveshare.com/wiki/Open429Z-D

Produkty powiązane

do góry
Sklep jest w trybie podglądu
Pokaż pełną wersję strony
Sklep internetowy Shoper.pl